E266UP DRAGON266U Linear Foam Rubber Injection Molding Machine
Referensi Teknis
| MOULD-HOLDER | N° | 2 | 6 | 8 | 10 | ||||
| MOLD CLAMPING FORCE | KN | 2000 | ||||
| STROKE Mbukak jamur | mm | 350 | ||||
| DIMENSI HEATING PLATE | mm | 580x550 | ||||
| STANDARD MOLD Dhuwur | mm | 105-330 | ||||
| Dhuwur injeksi | mm | 60 | ||||
| PASSAGGE BE1WEEN COLUNS | mm | 605 | ||||
| JARAK ANTARA PUSAT INJEKSI | mm | 240/290 | ||||
| DAYA PANAS PLAT | KW | 6, 7 | ||||
| UNIT INJEKSI | ||||||
| JUMLAH UNIT INJEKSI | N° iku | 2 (1 saben ver.2 staz.) | PILIHAN | |||
| DIAMETER SCREW | mm | 60 | 75 | |||
| L/D SEKRUP L/DDELA VIS | — | 19 | ||||
| VOLUME INJEKSI | cm | 900 | 1400 | |||
| TEKANAN INJEKSI | bar | 1065 | ||||
| KECEPATAN SCREW | rpm | 0-140 | 0 + 140 | |||
| SPEED INJEKSI | cm3/ sek | 230 | 700 | |||
| TORSI SCREW (maks) | DaNm | 160 | 160 | |||
| ZON PANAS | N° | 4 | 4 | |||
| DAYA DIINSTAL | ||||||
| UNIT INJEKSI PANAS | KW | 10.5 | 10.5 | 10.5 | 10.5 | |
| MOTOR MOVEMENT INJECTOR | KW | 1.5 | 1.5 | 1.5 | 1.5 | |
| PIRING sing digawe panas | KW | 26.8 | 80.4 | 107.2 | 134 | |
| UNIT HIDROLIK MOTOR | KW | 48.6 | 48.6 | 48.6 | 48.6 | |
| POMPA VACUUM | KW | 2.2 | 2.2 | 2.2 | 2.2 | |
| TOTAL DIPASANG POWER | KW | 89.6 | 143.2 | 170 | 196.8 | |
| KONSUMSI RATA-RATA | ||||||
| ENERGI LISTRIK | kWh | 20 | 44 | 55 | 76 | |
| UDARA | NL/min | 100 | 100 | 100 | 100 | |
| UNIT REFRIGERASI | frig/h Frig | 16000 | 21000 | 27000 | 30000 | |
| BOBOT | ||||||
| BOOT NET | Kg | 12600 | 23600 | 29044 | 34600 | |
| DIMENSI | ||||||
| A-DEPTH | mm | 4500 | ||||
| B-LENGTH | mm | 4660 | 8500 | 10420 | 12340 | |
| C-Stasiun LENGTH | mm | 1920 | 5760 | 7680 | 9600 | |
| H-dhuwur | mm | 2800 | ||||
Tulis pesen sampeyan ing kene lan kirimake menyang kita